Design
The Acu-Cutter 350 is a simple multi purpose foam cutter that can
cut most foams up to 8 ½ inches thick. The Acu-Cutter 350 has 2 blades,
one stationery and one moving. The blades are made from ½ inch (front to
back) “V” tooth blade material (10 teeth per inch) to produce a fine
reliable cut. The Acu-Cutter 350 is also available as a 12 inch saw.
Because foam saws are awkward to use, we do not recommend this unless
your foam cutting requires the longer length.
Features*
Uses a detachable, low profile base with glide rollers This base
can be removed to produce angle cuts or sculpting Powered with a 4.5 amp
Black & Decker JS 500 jig saw motor with variable speed. Accordingly,
these motors can be replaced at a low cost with ease and parts are
readily available. Other more expensive foam cutters can cost $350 to
replace a motor. Because the Acu-Cutter 350 motor can be replaced with
ease, the Acu-Cutter 350 is the best choice today for a reliable high
volume foam cutter.
Quality
Pre-tested ready to use out of the box. Other cutters require the
purchase of supplementary parts and assembly.
Simply put, the Acu-Cutter 350 is a relatively inexpensive, reliable,
multi purpose foam cutter that can be easily serviced.
Price $270.00